Produits

  • Deep Groove Ball Bearings

    The inner ring and outer ring of this type of ball bearings have a deep groove raceway which can be used to carry radial loads and parts of the axial loads.It can even be used to carry much heavy axial loads after the increase of radial clearance thus it can be taken place of the high speed angular contact ball bearings.

  • Self-Aligning Ball

    The inner ring has two raceways, while the outer ring has a spherical raceway with the curvature center of the spherical surface aligned with the center of the bearing. So, the inner ring, ball, and cage can tilt relatively freely towards the outer ring. Therefore, the deviation caused by the machining error of the shaft and bearing box can be automatically adjusted.

    The inner ring tapered hole bearing can be installed with a locking sleeve.

     

  • Bearings Untts

    The seated outer spherical bearing consists of a double-sided sealed wide inner ring deep groove ball bearing with a spherical outer section and a bearing seat.

  • Spherical Roller Bearings

    The raceway of the shaft washers of this type of bearing if spherical in shape thus of self-alignment.

  • Thrust Roller Bearings

    This type of bearings can only be used to carry axial loads but not radial loads and to fix axial direction but not radial direction.

  • Cylindrical Roller Bearings

    This type of ball bearings has two raceways in the inner and a common sphered raceway in the outer ring.It owns an inherent self-aligment property.That the angular misalignment permits within the range of 1.5° to 3° they are particularty for appolications in where misalignment that arised from errors in mounting or shaft deflection.

  • Long Cylindrical Roller Bearings

    Needle roller bearings are distinguished for their compact designs,and this feature makes them particularly suitable for using in machine parts where the radial space is limited.

  • Angular Contact Ball Bearings

    Needle roller bearings are distinguished for their compact designs,and this feature makes them particularly suitable for using in machine parts where the radial space is limited.

  • Taper Roller Bearings

    The angular contact ball bearings can be used to carry both radial and axial loads simnultaneously,and is subjected to high speed rotation.

  • Thrust Ball Bearings

    This type of bearings can be used to carry radial-axial combined loads.At the same time in carrying radial loads.additional axial threst will be implicated.

  • Greenhouse Door Roller

    Une serre performante ne se résume pas à une structure solide et à une couverture adéquate : elle repose également sur des composants mécaniques intelligents qui simplifient les opérations quotidiennes. Parmi ceux-ci, le système d'enroulement de porte de serre est un composant essentiel, mais souvent négligé, qui joue un rôle crucial en termes d'accessibilité, de sécurité et de confort d'utilisation.

    Nos roulettes pour portes de serre sont conçues pour un fonctionnement fluide et durable dans les environnements très humides. Conçues pour les portes coulissantes de serre, ces roulettes garantissent un accès facile, une résistance aux agressions environnementales et une utilisation intensive.

  • Greenhouse Pillow Block Bearing

    Lors de la construction ou de la rénovation d'une serre, chaque composant compte, notamment ceux qui assurent la fluidité des mouvements et la fiabilité structurelle. Le palier à semelle est l'un de ces composants essentiels. Conçus pour soutenir les arbres rotatifs et réduire les frottements, nos paliers à semelle pour serres offrent des performances et une durabilité exceptionnelles, même dans les environnements agricoles les plus exigeants.

    Que vous gériez des systèmes de ventilation de toit, des entraînements de rideaux ou des moteurs d'enroulement de parois latérales, le choix du palier à semelle approprié garantit que votre serre fonctionne efficacement et avec un minimum d'entretien.

    Matériau : Acier au carbone, galvanisé

    Application : Serre

    Taille : 32/48/60/Personnalisé

Dernières nouvelles
  • Conception et fonctionnalité des roulements à billes rainurés
    Dans le domaine des machines industrielles et de l'ingénierie de précision, les roulements à billes rainurés sont des composants fondamentaux qui garantissent un fonctionnement fluide sous diverses charges.
    Détail
  • Essai de capacité de charge d'une bétonnière
    Dans le domaine des machines lourdes, les roulements des bétonnières jouent un rôle essentiel dans le maintien de l'efficacité opérationnelle.
    Détail
  • Dimensions des roulements 6004 dans les conceptions d'articulations robotisées
    Les conceptions de joints robotisés exigent précision, durabilité et fiabilité, faisant des roulements une pierre angulaire de leur ingénierie.
    Détail

Si vous êtes intéressé par nos produits, vous pouvez choisir de laisser vos informations ici et nous vous contacterons sous peu.


fr_FRFrench