Izdelki

Globoko utorni kroglični ležaji

The inner ring and outer ring of this type of ball bearings have a deep groove raceway which can be used to carry radial loads and parts of the axial loads.It can even be used to carry much heavy axial loads after the increase of radial clearance thus it can be taken place of the high speed angular contact ball bearings.

poizvedba podrobnost
Samoporavnalna krogla

The inner ring has two raceways, while the outer ring has a spherical raceway with the curvature center of the spherical surface aligned with the center of the bearing. So, the inner ring, ball, and cage can tilt relatively freely towards the outer ring. Therefore, the deviation caused by the machining error of the shaft and bearing box can be automatically adjusted.

The inner ring tapered hole bearing can be installed with a locking sleeve.

poizvedba podrobnost
Ležaji Untts

The seated outer spherical bearing consists of a double-sided sealed wide inner ring deep groove ball bearing with a spherical outer section and a bearing seat.

poizvedba podrobnost
Sferični valjčni ležaji

The raceway of the shaft washers of this type of bearing if spherical in shape thus of self-alignment.

poizvedba podrobnost
Aksialni valjčni ležaji

This type of bearings can only be used to carry axial loads but not radial loads and to fix axial direction but not radial direction.

poizvedba podrobnost
Cilindrični valjčni ležaji

This type of ball bearings has two raceways in the inner and a common sphered raceway in the outer ring.It owns an inherent self-aligment property.That the angular misalignment permits within the range of 1.5° to 3° they are particularty for appolications in where misalignment that arised from errors in mounting or shaft deflection.

poizvedba podrobnost
Dolgi cilindrični valjčni ležaji

Needle roller bearings are distinguished for their compact designs,and this feature makes them particularly suitable for using in machine parts where the radial space is limited.

poizvedba podrobnost
Kotni kontaktni kroglični ležaji

Needle roller bearings are distinguished for their compact designs,and this feature makes them particularly suitable for using in machine parts where the radial space is limited.

poizvedba podrobnost
Konični valjčni ležaji

The angular contact ball bearings can be used to carry both radial and axial loads simnultaneously,and is subjected to high speed rotation.

poizvedba podrobnost
Aksialni kroglični ležaji

This type of bearings can be used to carry radial-axial combined loads.At the same time in carrying radial loads.additional axial threst will be implicated.

poizvedba podrobnost
Roler za vrata rastlinjaka

Dobro delujoč rastlinjak zahteva več kot le močan okvir in ustrezno prevleko – odvisen je tudi od pametnih mehanskih komponent, ki poenostavljajo vsakodnevno delovanje. Med njimi je valjček za vrata rastlinjaka bistven, a pogosto spregledan sestavni del, ki igra ključno vlogo pri dostopnosti, varnosti in splošnem udobju uporabnika.

Naši valjčki za vrata rastlinjakov so zasnovani za nemoteno in dolgotrajno delovanje v okoljih z visoko vlažnostjo. Zasnovani so za uporabo v drsnih vratih rastlinjakov in zagotavljajo enostaven dostop, odpornost na okoljske obremenitve ter podporo za zahtevne aplikacije.

poizvedba podrobnost
Blok ležaja za toplogredne blazine

Pri gradnji ali nadgradnji rastlinjaka je pomemben vsak sestavni del – še posebej tisti, ki zagotavljajo nemoteno gibanje in konstrukcijsko zanesljivost. Eden takšnih ključnih sestavnih delov je vzglavni ležaj. Naši vzglavni ležaji za rastlinjake, zasnovani za podporo vrtečih se gredi in zmanjšanje trenja, zagotavljajo izjemno zmogljivost in vzdržljivost tudi v najzahtevnejših kmetijskih okoljih.

Ne glede na to, ali upravljate strešne prezračevalne sisteme, pogone zaves ali motorje za dvigovanje stranskih sten, izbira pravega ležaja vzmetnega bloka zagotavlja učinkovito delovanje vašega rastlinjaka z minimalnim vzdrževanjem.

Material: ogljikovo jeklo, pocinkano

Uporaba: Rastlinjak

Velikost: 32/48/60/Po meri

poizvedba podrobnost

1
2
NEXT
Total: 2