Ibicuruzwa

  • Deep Groove Ball Bearings

    The inner ring and outer ring of this type of ball bearings have a deep groove raceway which can be used to carry radial loads and parts of the axial loads.It can even be used to carry much heavy axial loads after the increase of radial clearance thus it can be taken place of the high speed angular contact ball bearings.

  • Self-Aligning Ball

    The inner ring has two raceways, while the outer ring has a spherical raceway with the curvature center of the spherical surface aligned with the center of the bearing. So, the inner ring, ball, and cage can tilt relatively freely towards the outer ring. Therefore, the deviation caused by the machining error of the shaft and bearing box can be automatically adjusted.

    The inner ring tapered hole bearing can be installed with a locking sleeve.

     

  • Bearings Untts

    The seated outer spherical bearing consists of a double-sided sealed wide inner ring deep groove ball bearing with a spherical outer section and a bearing seat.

  • Spherical Roller Bearings

    The raceway of the shaft washers of this type of bearing if spherical in shape thus of self-alignment.

  • Thrust Roller Bearings

    This type of bearings can only be used to carry axial loads but not radial loads and to fix axial direction but not radial direction.

  • Cylindrical Roller Bearings

    This type of ball bearings has two raceways in the inner and a common sphered raceway in the outer ring.It owns an inherent self-aligment property.That the angular misalignment permits within the range of 1.5° to 3° they are particularty for appolications in where misalignment that arised from errors in mounting or shaft deflection.

  • Long Cylindrical Roller Bearings

    Needle roller bearings are distinguished for their compact designs,and this feature makes them particularly suitable for using in machine parts where the radial space is limited.

  • Angular Contact Ball Bearings

    Needle roller bearings are distinguished for their compact designs,and this feature makes them particularly suitable for using in machine parts where the radial space is limited.

  • Taper Roller Bearings

    The angular contact ball bearings can be used to carry both radial and axial loads simnultaneously,and is subjected to high speed rotation.

  • Thrust Ball Bearings

    This type of bearings can be used to carry radial-axial combined loads.At the same time in carrying radial loads.additional axial threst will be implicated.

  • Greenhouse Door Roller

    Ikiraro gikora neza gisaba ibirenze ikintu gikomeye kandi gitwikiriye neza - biterwa kandi nibikoresho byubwenge byoroshya imikorere ya buri munsi. Muri ibyo, urugi rwa Greenhouse Door Roller nikintu cyingenzi ariko gikunze kwirengagizwa kigira uruhare runini mugushikira, umutekano, no korohereza abakoresha muri rusange.

    Inzu ya Greenhouse Door Rollers yakozwe muburyo bworoshye, burambye burigihe mubushuhe bwinshi. Yashizweho kugirango ikoreshwe mu kunyerera ku nzugi za pariki, iyi mizingo itanga ubworoherane bwo kugera, kurwanya imihangayiko y’ibidukikije, hamwe ninkunga yo gusaba imirimo iremereye.

  • Greenhouse Pillow Block Bearing

    Iyo kubaka cyangwa kuzamura pariki, buri kintu cyose gifite akamaro - cyane cyane icyerekana neza kandi cyizewe. Kimwe mu bintu by'ingenzi ni ikintu cyo guhagarika umusego. Yashizweho kugirango ishyigikire ibiti bizunguruka no kugabanya ubushyamirane, Imyenda ya Greenhouse Pillow Block Bearings itanga imikorere myiza kandi iramba ndetse no mubidukikije bikenerwa cyane mubuhinzi.

    Waba ucunga sisitemu yo guhumeka igisenge, ibinyabiziga bitwikiriye, cyangwa moteri yo kuzenguruka ku kayira kegereye umuhanda, guhitamo umusego w umusego wiburyo byerekana ko pariki yawe ikora neza kandi ikabungabungwa bike.

    Ibikoresho: Ibyuma bya karubone, byashizwemo

    Gusaba: Greenhouse

    Ingano: 32/48/60 / Yashizweho

Amakuru agezweho
  • Grooved Ball Yambaye Igishushanyo nigikorwa
    Mu rwego rwimashini zinganda nubuhanga busobanutse neza, imipira yimipira ni ibice fatizo byemeza imikorere myiza mumitwaro itandukanye.
    Ibisobanuro
  • Imvange ya beto yikoreye umutwaro wo gupima ubushobozi
    Mu rwego rwimashini ziremereye, imashini ivanga beto igira uruhare runini mugukomeza gukora neza.
    Ibisobanuro
  • 6004 Kwifata Ibipimo Mubishushanyo mbonera bya Robo
    Ibishushanyo mbonera bya robo bisaba ubuhanga, kuramba, no kwizerwa, bigatuma ibyuma bifata urufatiro rwubwubatsi bwabo.
    Ibisobanuro

Niba ushimishijwe nibicuruzwa byacu, urashobora guhitamo gusiga amakuru yawe hano, kandi tuzahuza nawe vuba.


rwRwandese