Zogulitsa

  • Deep Groove Ball Bearings

    The inner ring and outer ring of this type of ball bearings have a deep groove raceway which can be used to carry radial loads and parts of the axial loads.It can even be used to carry much heavy axial loads after the increase of radial clearance thus it can be taken place of the high speed angular contact ball bearings.

  • Self-Aligning Ball

    The inner ring has two raceways, while the outer ring has a spherical raceway with the curvature center of the spherical surface aligned with the center of the bearing. So, the inner ring, ball, and cage can tilt relatively freely towards the outer ring. Therefore, the deviation caused by the machining error of the shaft and bearing box can be automatically adjusted.

    The inner ring tapered hole bearing can be installed with a locking sleeve.

     

  • Bearings Untts

    The seated outer spherical bearing consists of a double-sided sealed wide inner ring deep groove ball bearing with a spherical outer section and a bearing seat.

  • Spherical Roller Bearings

    The raceway of the shaft washers of this type of bearing if spherical in shape thus of self-alignment.

  • Thrust Roller Bearings

    This type of bearings can only be used to carry axial loads but not radial loads and to fix axial direction but not radial direction.

  • Cylindrical Roller Bearings

    This type of ball bearings has two raceways in the inner and a common sphered raceway in the outer ring.It owns an inherent self-aligment property.That the angular misalignment permits within the range of 1.5° to 3° they are particularty for appolications in where misalignment that arised from errors in mounting or shaft deflection.

  • Long Cylindrical Roller Bearings

    Needle roller bearings are distinguished for their compact designs,and this feature makes them particularly suitable for using in machine parts where the radial space is limited.

  • Angular Contact Ball Bearings

    Needle roller bearings are distinguished for their compact designs,and this feature makes them particularly suitable for using in machine parts where the radial space is limited.

  • Taper Roller Bearings

    The angular contact ball bearings can be used to carry both radial and axial loads simnultaneously,and is subjected to high speed rotation.

  • Thrust Ball Bearings

    This type of bearings can be used to carry radial-axial combined loads.At the same time in carrying radial loads.additional axial threst will be implicated.

  • Greenhouse Door Roller

    Kutentha kogwira ntchito bwino kumafunikira zambiri osati chimango cholimba komanso chophimba choyenera - zimatengeranso zida zamakina zomwe zimathandizira kuti ntchito za tsiku ndi tsiku zikhale zosavuta. Mwa izi, Greenhouse Door Roller ndi gawo lofunikira koma lomwe nthawi zambiri silimanyalanyazidwa lomwe limagwira ntchito yofunika kwambiri pakupezeka, chitetezo, komanso kusavuta kwa ogwiritsa ntchito.

    Ma Greenhouse Door Rollers athu amapangidwa kuti azigwira ntchito mosalala, kwanthawi yayitali m'malo okhala ndi chinyezi chambiri. Zopangidwira kuti zigwiritsidwe ntchito pazitseko za greenhouses, zodzigudubuzazi zimatsimikizira kupezeka mosavuta, kukana kupsinjika kwa chilengedwe, ndikuthandizira ntchito zolemetsa.

  • Greenhouse Pillow Block Bearing

    Pomanga kapena kukulitsa wowonjezera kutentha, chigawo chilichonse chimakhala chofunikira - makamaka zomwe zimatsimikizira kuyenda bwino komanso kudalirika kwadongosolo. Chimodzi mwazofunikira kwambiri ndi Pillow Block Bearing. Zopangidwa kuti zizithandizira zitsulo zozungulira ndikuchepetsa kukangana, Greenhouse Pillow Block Bearings yathu imapereka magwiridwe antchito komanso kulimba ngakhale m'malo aulimi ovuta kwambiri.

    Kaya mukuyang'anira makina olowera padenga, zoyendetsa zotchinga, kapena ma motors roll-up motors, kusankha mapilo oyenera kumawonetsetsa kuti greenhouse yanu imagwira ntchito bwino komanso yosakonza pang'ono.

    Zida: Chitsulo cha carbon, malata

    Ntchito: Greenhouse

    Kukula: 32/48/60/ Mwamakonda

Nkhani zaposachedwa
  • Grooved Ball Bearing Design ndi Kachitidwe
    M'makina a mafakitale ndi uinjiniya wolondola, mayendedwe a mpira wopindika ndi zigawo zoyambira zomwe zimawonetsetsa kuti zikuyenda bwino pansi pa katundu wosiyanasiyana.
    Tsatanetsatane
  • Konkire Yosakaniza Yonyamula Katundu Kuyesa Kukwanitsa
    M'makina olemera, zosakaniza zosakaniza konkire zimagwira ntchito yofunika kwambiri kuti zigwire bwino ntchito.
    Tsatanetsatane
  • 6004 Kukhala ndi Miyeso mu Mapangidwe Ogwirizana a Robotic
    Mapangidwe olumikizirana ma robotiki amafunikira kulondola, kulimba, komanso kudalirika, zomwe zimapangitsa kuti ma bearings akhale mwala wapangodya wa uinjiniya wawo.
    Tsatanetsatane

Ngati muli ndi chidwi ndi zinthu zathu, mutha kusankha kusiya zambiri zanu pano, ndipo tidzalumikizana nanu posachedwa.


nyNorwegian