Produkter

Dybsporskuglelejer

The inner ring and outer ring of this type of ball bearings have a deep groove raceway which can be used to carry radial loads and parts of the axial loads.It can even be used to carry much heavy axial loads after the increase of radial clearance thus it can be taken place of the high speed angular contact ball bearings.

forespørgsel detalje
Selvjusterende kugle

The inner ring has two raceways, while the outer ring has a spherical raceway with the curvature center of the spherical surface aligned with the center of the bearing. So, the inner ring, ball, and cage can tilt relatively freely towards the outer ring. Therefore, the deviation caused by the machining error of the shaft and bearing box can be automatically adjusted.

The inner ring tapered hole bearing can be installed with a locking sleeve.

forespørgsel detalje
Lejer Untts

The seated outer spherical bearing consists of a double-sided sealed wide inner ring deep groove ball bearing with a spherical outer section and a bearing seat.

forespørgsel detalje
Sfæriske rullelejer

The raceway of the shaft washers of this type of bearing if spherical in shape thus of self-alignment.

forespørgsel detalje
Aksivalslejer

This type of bearings can only be used to carry axial loads but not radial loads and to fix axial direction but not radial direction.

forespørgsel detalje
Cylindriske rullelejer

This type of ball bearings has two raceways in the inner and a common sphered raceway in the outer ring.It owns an inherent self-aligment property.That the angular misalignment permits within the range of 1.5° to 3° they are particularty for appolications in where misalignment that arised from errors in mounting or shaft deflection.

forespørgsel detalje
Lange cylindriske rullelejer

Needle roller bearings are distinguished for their compact designs,and this feature makes them particularly suitable for using in machine parts where the radial space is limited.

forespørgsel detalje
Vinkelkontaktkuglelejer

Needle roller bearings are distinguished for their compact designs,and this feature makes them particularly suitable for using in machine parts where the radial space is limited.

forespørgsel detalje
Koniske rullelejer

The angular contact ball bearings can be used to carry both radial and axial loads simnultaneously,and is subjected to high speed rotation.

forespørgsel detalje
Akseluglelejer

This type of bearings can be used to carry radial-axial combined loads.At the same time in carrying radial loads.additional axial threst will be implicated.

forespørgsel detalje
Drivhusdørrulle

Et velfungerende drivhus kræver mere end blot en stærk ramme og ordentlig afdækning – det afhænger også af smarte mekaniske komponenter, der forenkler den daglige drift. Blandt disse er drivhusdørrullen en essentiel, men ofte overset komponent, der spiller en afgørende rolle for tilgængelighed, sikkerhed og generel brugervenlighed.

Vores drivhusdørruller er konstrueret til problemfri og langvarig drift i miljøer med høj luftfugtighed. Disse ruller er designet til brug i skydedøre til drivhuse og sikrer nem adgang, modstandsdygtighed over for miljøbelastning og understøttelse af krævende opgaver.

forespørgsel detalje
Drivhuspudebloklejer

Når man bygger eller opgraderer et drivhus, er alle komponenter vigtige – især dem, der sikrer jævn bevægelse og strukturel pålidelighed. En sådan kritisk komponent er pudebloklejerne. Vores pudebloklejer til drivhuse er designet til at understøtte roterende aksler og reducere friktion og leverer enestående ydeevne og holdbarhed i selv de mest krævende landbrugsmiljøer.

Uanset om du administrerer tagventilationssystemer, gardindrev eller sidevægsoprulningsmotorer, sikrer valget af det rigtige pudeblokleje, at dit drivhus fungerer effektivt og med minimal vedligeholdelse.

Materiale: Kulstofstål, galvaniseret

Anvendelse: Drivhus

Størrelse: 32/48/60/Tilpasset

forespørgsel detalje

1
2
NEXT
Total: 2