Proizvodi

Kuglični ležajevi s dubokim žlijebom

The inner ring and outer ring of this type of ball bearings have a deep groove raceway which can be used to carry radial loads and parts of the axial loads.It can even be used to carry much heavy axial loads after the increase of radial clearance thus it can be taken place of the high speed angular contact ball bearings.

upit detalj
Samoporavnavajuća kugla

The inner ring has two raceways, while the outer ring has a spherical raceway with the curvature center of the spherical surface aligned with the center of the bearing. So, the inner ring, ball, and cage can tilt relatively freely towards the outer ring. Therefore, the deviation caused by the machining error of the shaft and bearing box can be automatically adjusted.

The inner ring tapered hole bearing can be installed with a locking sleeve.

upit detalj
Ležajevi Untts

The seated outer spherical bearing consists of a double-sided sealed wide inner ring deep groove ball bearing with a spherical outer section and a bearing seat.

upit detalj
Sferični valjkasti ležajevi

The raceway of the shaft washers of this type of bearing if spherical in shape thus of self-alignment.

upit detalj
Aksijalni valjkasti ležajevi

This type of bearings can only be used to carry axial loads but not radial loads and to fix axial direction but not radial direction.

upit detalj
Cilindrični valjkasti ležajevi

This type of ball bearings has two raceways in the inner and a common sphered raceway in the outer ring.It owns an inherent self-aligment property.That the angular misalignment permits within the range of 1.5° to 3° they are particularty for appolications in where misalignment that arised from errors in mounting or shaft deflection.

upit detalj
Dugi cilindrični valjkasti ležajevi

Needle roller bearings are distinguished for their compact designs,and this feature makes them particularly suitable for using in machine parts where the radial space is limited.

upit detalj
Kuglični ležajevi s kosim kontaktom

Needle roller bearings are distinguished for their compact designs,and this feature makes them particularly suitable for using in machine parts where the radial space is limited.

upit detalj
Konusni valjkasti ležajevi

The angular contact ball bearings can be used to carry both radial and axial loads simnultaneously,and is subjected to high speed rotation.

upit detalj
Aksijalni kuglični ležajevi

This type of bearings can be used to carry radial-axial combined loads.At the same time in carrying radial loads.additional axial threst will be implicated.

upit detalj
Valjak za vrata staklenika

Dobro funkcionalan staklenik zahtijeva više od samo jakog okvira i odgovarajućeg pokrivača - on također ovisi o pametnim mehaničkim komponentama koje pojednostavljuju svakodnevno poslovanje. Među njima, rolo vrata staklenika je bitna, ali često zanemarena komponenta koja igra ključnu ulogu u pristupačnosti, sigurnosti i ukupnoj udobnosti korisnika.

Naši valjci za vrata staklenika su konstruirani za nesmetan i dugotrajan rad u okruženjima s visokom vlažnošću. Dizajnirani za upotrebu u kliznim vratima staklenika, ovi valjci osiguravaju jednostavan pristup, otpornost na utjecaje okoline i podršku za zahtjevne primjene.

upit detalj
Ležaj jastuka za staklenike

Prilikom izgradnje ili nadogradnje staklenika, svaka komponenta je važna – posebno one koje osiguravaju glatko kretanje i pouzdanost konstrukcije. Jedna od takvih ključnih komponenti je jastučasti blok ležaj. Dizajnirani da podupiru rotirajuće osovine i smanje trenje, naši jastučasti blok ležajevi za staklenike pružaju izvanredne performanse i izdržljivost čak i u najzahtjevnijim poljoprivrednim okruženjima.

Bez obzira da li upravljate sistemima za ventilaciju krova, pogonima zavjesa ili motorima za podizanje bočnih zidova, odabir pravog ležaja sa jastučastim blokom osigurava efikasan rad vašeg staklenika uz minimalno održavanje.

Materijal: Ugljični čelik, pocinčani

Primjena: Staklenik

Veličina: 32/48/60/Prilagođeno

upit detalj

1
2
NEXT
Total: 2