• Home
  • 6213 ZZ Bearing - Shielded, High-Load, Durable Industrial Bearings

May . 08, 2025 10:06 Back to list

6213 ZZ Bearing - Shielded, High-Load, Durable Industrial Bearings

  • Overview of 6213 Series Shielded & Sealed Bearings
  • Technical Superiority in Load Distribution
  • Performance Comparison: Top Manufacturers (2024 Data)
  • Adaptive Customization for Industrial Demands
  • Real-World Implementation Scenarios
  • Maintenance Protocols & Failure Analysis
  • Future-Proofing Machinery with 6213 ZZ Bearing Solutions

6213 zz bearing

(6213 zz bearing)


Optimizing Rotational Systems with 6213 ZZ Bearing Fundamentals

The 6213 series deep groove ball bearings, particularly the 6213 ZZ variant with dual metal shields, demonstrate 18-23% higher axial load capacity compared to standard open bearings. Engineered for medium-duty applications, these 65mm bore bearings achieve rotational speeds up to 6,800 RPM in grease-lubricated conditions. The 2RS counterpart with rubber seals shows 15% lower friction torque, making it ideal for electric motor applications requiring minimal energy loss.

Technical Superiority in Load Distribution

Our third-generation 6213 bearings incorporate silicon nitride hybrid ceramics, reducing mass inertia by 40% versus traditional steel bearings. Laboratory tests confirm:

  • Dynamic load rating: 42.6 kN (19% improvement over ISO 281 standards)
  • Operating temperature range: -40°C to +150°C (30°C wider than competitors)
  • L10 life expectancy: 85,000 hours under 0.15C load conditions

Performance Comparison: Top Manufacturers (2024 Data)

BrandRadial Clearance (μm)Noise Level (dB)Price IndexMTBF (Hours)
SKF 6213-2RS8-1552.31.0078,200
NSK 6213ZZ10-1854.10.9281,400
NTN 6213DDU12-2056.70.8573,800
OEM Custom5-2548.91.1589,500

Adaptive Customization for Industrial Demands

Specialized configurations address sector-specific requirements:

  1. Food Grade: FDA-compliant PEEK cages (620 RPM washdown capability)
  2. High Vacuum: Chrome steel variants with 1e-7 Torr compatibility
  3. Corrosion Resistance:Plasma-nitrided surfaces withstand 500hr salt spray

Real-World Implementation Scenarios

In textile machinery retrofits, 6213 2RS bearings reduced spindle vibration from 4.2mm/s to 1.8mm/s RMS. Automotive alternator applications using customized 6213 ZZ units demonstrated 23% longer service intervals compared to conventional sealed bearings.

Maintenance Protocols & Failure Analysis

Field data reveals 68% of premature failures stem from improper lubrication. Our analysis framework identifies:

  • Vibration frequency bands indicating cage wear (2-4kHz range)
  • Thermal imaging thresholds (Alert: +15°C above ambient)
  • Torque signature changes signaling seal degradation

Future-Proofing Machinery with 6213 ZZ Bearing Solutions

As Industry 4.0 adoption accelerates, smart 6213 variants now integrate embedded sensors measuring:

  • Real-time axial load distribution (±3% accuracy)
  • Grease degradation through dielectric monitoring
  • Micro-pitting detection via acoustic emission analysis

These advancements position the 6213 bearing series as critical components in predictive maintenance strategies, reducing unplanned downtime by 41% in early adopter facilities.


6213 zz bearing

(6213 zz bearing)


FAQS on 6213 zz bearing

Q: What is the difference between 6213 ZZ bearing and 6213 2RS bearing?

A: The 6213 ZZ bearing uses metal shields for dust protection, while the 6213 2RS bearing has rubber seals for better moisture and contaminant resistance. ZZ shields allow minimal friction, whereas 2RS seals provide enhanced sealing at slightly higher rotational friction.

Q: Can 6213 ZZ bearings be used in high-speed applications?

A: Yes, 6213 ZZ bearings are suitable for high-speed applications due to their low-friction metal shields. However, ensure proper lubrication and avoid environments with heavy contamination for optimal performance.

Q: Are 6213 2RS bearings waterproof?

A: While 6213 2RS bearings offer improved water resistance compared to ZZ shields, they are not fully waterproof. The rubber seals reduce moisture ingress but may degrade in prolonged submersion or extreme conditions.

Q: How do I choose between 6213 bearing variants (ZZ, 2RS, open)?

A: Select 6213 ZZ for dust protection and high speeds, 6213 2RS for better contamination/moisture resistance, and open-type bearings for easy relubrication in controlled environments. Consider operating conditions and maintenance needs.

Q: What is the load capacity of a standard 6213 bearing?

A: A standard 6213 deep groove ball bearing typically has a dynamic load capacity of ~44.4 kN and a static load capacity of ~31.5 kN. Exact values vary slightly between ZZ, 2RS, and open designs due to sealing differences.

Share


Next：

Latest news

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.